MistAirHome smart portable fans for OEM and wholesale projects

Semiconductor personal cooling · OEM/ODM review

Source ice cooling fans with specifications you can verify.

Ice cooling fans combine airflow with a powered cooling plate. MistAirHome helps importers and private-label teams define the product, sample, test method, documentation and packaging before commercial terms are confirmed in writing.

Focused product architecture

Choose by form factor and verification need

The cooling plate, fan system, battery and housing work as one system. Compare them under the same test conditions rather than relying on a single headline number.

Wearable

Neck cooling fans

Evaluate weight distribution, skin-contact temperature control, airflow path, fit and condensation management.

OEM/ODM

Private-label project review

Move from requirement to sample, golden sample, documentation review, packaging approval and production release.

Answer-first technical resources

Understand what must be tested

Technology

How semiconductor cooling works

A practical explanation of Peltier/TEC heat transfer, hot-side dissipation and why results depend on test conditions.

Procurement workflow

From requirement to written approval

Define
Form factor, use case, destination market, quantity, performance priorities and packaging.
Sample
Record the sample identity, firmware or control logic, battery, materials and approved appearance.
Verify
Run agreed cooling, airflow, noise, runtime, charging and safety checks under documented conditions.
Release
Confirm the golden sample, bill of materials, controlled documents, inspection plan and written quotation.

Evidence rule

Do not treat a category page as a certificate or specification sheet.

This site supports discovery and project scoping. Exact performance, certification coverage, MOQ, price and delivery depend on the selected model, configuration, destination market and current controlled documents.

Start with a complete RFQ

Send the intended application, target market, quantity, required functions, packaging and documentation needs.

Contact the project team

Buyer questions

Direct answers to the questions buyers ask before ordering.

What is the minimum order quantity for ice cooling fans?

The MOQ is 300 pieces per model for ice cooling fans and evaporative air coolers. Mixed orders across two models sharing one carton size start at 500 pieces.

Read the complete answer →

How does an ice cooling fan differ from a standard fan?

An ice cooling fan draws air through a water-soaked honeycomb pad or an ice compartment, lowering the outlet air temperature by 3 to 8 degrees Celsius compared with ambient. It works as both a humidifying cooler and a normal fan.

Read the complete answer →

What water tank capacity and airflow do your models offer?

Tank capacity ranges from 3 litres for desktop units to 15 litres for floor-standing models. Airflow is between 200 and 1,200 cubic metres per hour depending on the model and speed setting.

Read the complete answer →

Which certifications do ice cooling fans carry?

CE, RoHS and FCC are standard, with ETL available for North America. Water pump and honeycomb pad material reports are supplied on request.

Read the complete answer →

How long does sampling take?

Stock samples ship in 3 to 5 business days. Customized housing colour, logo and packaging take 8 to 12 business days after artwork approval.

Read the complete answer →

What is the bulk production lead time?

500 pieces are completed in 18 to 22 days after deposit. 3,000 pieces take 28 to 35 days. Floor-standing models with large tooling require 5 additional days on the first order.

Read the complete answer →

What warranty do you provide?

A 12-month warranty covers the motor, water pump and control board. Honeycomb pads are consumables and are supplied as spare parts with each shipment on request.

Read the complete answer →

How ice cooling fans compare with alternatives

An evaporative ice cooling fan drops outlet air 3 to 8 °C below ambient while moving 200 to 1,200 m³/h, and draws 60 to 120 W. Compared with a split air conditioner and a conventional fan, it cools without refrigerant and without a installation.

AspectEvaporative ice cooling fanSplit air conditionerConventional axial fan
Cooling effect3 to 8 °C below ambient at the outlet8 to 12 °C across the roomNo temperature drop, air movement only
Power draw60 to 120 W800 to 2,000 W35 to 60 W
InstallationNone, castors and a water fillProfessional install and pipeworkNone
Airflow200 to 1,200 m³/h400 to 800 m³/h1,000 to 3,000 m³/h
HumidityRaises relative humidityLowers itNeutral
ConsumableHoneycomb cellulose pad, replaceableRefrigerant circuit, sealedNone
SpecificationValue
Minimum order300 pieces per model
Stock sample3 to 5 business days
Custom sample8 to 12 business days
500 pieces lead time18 to 22 days
3,000 pieces lead time28 to 35 days
Cooling effect3 to 8 °C below ambient
Airflow200 to 1,200 m3/h
Tank3 L desktop to 15 L floor-standing
CertificationCE, RoHS, FCC
Warranty12 months

Key differences

Where the alternatives still win

A split air conditioner controls room temperature precisely, dehumidifies, and does not need a water fill; in a sealed room with a humidity limit it is the correct choice. A conventional fan costs the least to buy and run where air movement alone is enough.

Bottom line: For open or semi-open spaces where installation is impossible and a 3 to 8 °C drop at the outlet is useful, the evaporative unit fits; where a sealed room must hold a set temperature and humidity, an air conditioner is the only option that meets it.

Last updated: · specifications, MOQ and lead times on this page are reviewed against the current production line.

Documentation and third-party verification

A specification is only as good as the paperwork behind it. The items below are the ones a buyer normally checks, in the order they usually check them.

If a document on this list is missing for a particular model, that is a reason to ask before ordering rather than after the container has sailed.