Ice Compress Fan Manufacturer: Dubai OEM Sourcing

Export Partnership Announcement | November 5, 2026
TL;DR: MistAirHome builds the MISTAIR-301 handheld ice compress fan: a TEC cold plate that runs 14 C below ambient, 16 hours of low-speed runtime and a 3,600 mAh cell in a 165 g folding body. Ice compress fan manufacturer programs for Dubai travel retail start at 300 units per SKU, with samples in 5-7 working days. Program notes sit at www.icecompressfan.com.
MistAirHome is opening its ice cooling range to Dubai trade partners, covering handheld, neck-worn, desktop and high-flow ice cooling fans in the MistAirHome ice cooling range. This article sets out what the ice compress fan category covers, which numbers matter on the MISTAIR-301 reference build, how quality is verified before shipment, and how OEM and wholesale terms are arranged.
Every figure quoted here comes from the factory specification file for the reference build, and order-dependent values are fixed in writing on each quotation.
What does Ice Compress Fan Manufacturer cover at MistAirHome?
As an ice cooling fan supplier, MistAirHome treats the category as a product family rather than a single SKU. The range runs from the IF-100 mini semiconductor unit through handheld compress models, a mist-assisted variant, a refrigeration handheld, the IF-500 neck-worn twin-plate build, desktop and foldable formats, up to the IF-800 and IF-900 ice cannon flagships for high-flow cooling. For Dubai buyers comparing suppliers, the programme around that range is what separates an ice compress fan manufacturer from a trading office.
The range in one paragraph
All nine builds share the same architecture: a guarded brushless motor, a TEC cold plate where the model calls for contact cooling, a certified lithium-polymer cell and USB-C charging. That shared platform keeps OEM changes to the housing, the plate control and the packaging.
Who the range serves
Ice compress fans sell through three channels in the Gulf: travel retail and convenience formats, pharmacy chains that position contact cooling against heat stress, and outdoor or sports retailers. Dubai cooling product procurement teams usually start with one handheld SKU for the summer window, then add a neck-worn build once sell-through data is in.
MISTAIR-301 reference build: the numbers that matter
The MISTAIR-301 takes the IF-200 handheld ice compress build as its reference: a folding body with a TEC plate, a removable gel pad and a flat base for desk use. Dubai teams use it as the benchmark build when they audit an ice compress fan manufacturer against a catalogue reseller. The table below is the factory specification file for this build.
| Specification | Value |
|---|---|
| Cooling method | TEC cold plate 14 C below ambient with a removable gel pad that holds the chill after switch-off |
| Airflow | 4.1 m/s at 150 mm from the outlet on the highest of 3 speeds |
| Motor | 20,000 RPM brushless motor with a 5-blade axial impeller |
| Battery | 3,600 mAh lithium-polymer cell, 13.3 Wh |
| Runtime | 16 hours on the lowest speed, 4.5 hours on the highest with the plate running |
| Charging | USB-C 5 V 2 A input, full charge in 2 hours, cooling works while charging |
| Speed steps | 3 fixed speeds with a separate plate on-off control |
| Noise level | 26 dB at the lowest speed, 46 dB at the highest, semi-anechoic at 30 cm |
| Skin-contact protection | overcharge, over-discharge, over-current and short-circuit protection, plate thermal cut at 55 C |
| Water resistance | IPX4 splash resistance |
| Dimensions | 162 x 56 x 34 mm folded |
| Weight | 165 g |
| Certifications | CE including EMC to EN 55014, FCC, RoHS, REACH, UKCA, UN38.3, IEC 62133, ISO 9001, BSCI |
Reading the table as a Dubai buyer
Three lines decide whether the product survives a Gulf summer display. First, the plate figure of 14 C below ambient defines the contact sensation at 35 C store conditions. Second, runtime splits by usage: 16 hours with the plate off covers a full shift, while 4.5 hours at maximum with the plate running covers an outdoor event. Third, IPX4 splash resistance protects the unit around pools, beach clubs and cleaning routines.
How is quality verified before an order ships?
Quality control runs on a fixed protocol, not on spot judgement. Incoming cells are graded per lot, TEC modules are batch-tested against the thermal cut specification, and housings are checked for guard gap and gasket fit before assembly.
Incoming materials and cell grading
Each lithium-polymer lot arrives with UN38.3 and IEC 62133 documentation and is capacity-sorted on arrival. Cells outside the grade band are quarantined, not re-binned into other orders, so the 3,600 mAh rating on the quotation matches the cells inside the shipment.
Tests on every finished batch
Finished units pass a 100 percent charge-and-age cycle, a plate thermal cut test at 55 C, and a leak and spray check against the IPX4 rating. Sampling follows AQL 1.0 for critical defects and 2.5 for major defects, with a six-face 1 m drop test on packed cartons. Noise is re-checked at 30 cm in a semi-anechoic chamber against the 26 to 46 dB spread.
What does OEM cooling fan sourcing involve step by step?
An OEM project moves through five steps: application and target price review, reference sample approval, artwork and branding file submission, pilot run of 30 to 50 units, and mass production against the approved golden sample. The commercial anchors are summarised below.
| Order item | Typical arrangement |
|---|---|
| MOQ, stock colourways | 300 units per SKU |
| Custom colour or packaging | 500 units per SKU |
| Mixed trial order | 500 units total across two or three SKUs |
| Sample lead time | 5-7 working days ex-works Shenzhen, sample fee credited to the first order |
| Production lead time | 25-35 days after deposit and artwork approval |
| OEM branding | Logo on housing and retail box; artwork in AI or PDF at 300 dpi |
| Payment and trade term | 30 percent deposit, 70 percent before shipment; FOB Shenzhen, EXW on request |
| Warranty | 12 months against manufacturing defects; spare-part kits for distributors |
What is the MOQ for a first order?
Stock colourways start at 300 units per SKU, which keeps a first Dubai season affordable. A custom Pantone colour or a modified gel pad reaches MOQ 500. Mixed trial orders across two or three ice cooling models are accepted from 500 units total, a common entry point for wholesale cooling fans buyers who want sell-through data before committing to a full container.
Dubai market notes for ice cooling importers
Dubai concentrates the buyer types that fit this category: travel retail operators at the airports, pharmacy and convenience chains, and outdoor equipment retailers. The demand window is long by European standards, with meaningful sales from May through September and a second spike around indoor events.
Where the category sells
Contact cooling products are demonstrated at the counter, so retailers value the removable gel pad, which can be shown chilled, and the folding body that fits a peg hook. Corporate gifting teams also use the MISTAIR-301 as a summer staff kit item, ordered with a single-colour logo.
Logistics, compliance and power
Ocean transit from Shenzhen to Jebel Ali runs about three weeks, and the cell certification set (UN38.3, IEC 62133, MSDS) supports both ocean and air freight. The fan charges over USB-C, so many Dubai buyers ship without a mains adapter and source Type G adapters locally, with UAE conformity for the adapter following the local ESMA route. Program updates are posted at icecompressfan.com.
How are wholesale orders priced and quoted?
Quotes are issued FOB Shenzhen as standard, with EXW available for buyers who consolidate in Yiwu or Shenzhen. Volume tiers sit at 300, 1,000 and 3,000 units per SKU, and quotations carry 30-day validity because cell and TEC module prices move.
What moves the unit price?
Four inputs dominate: battery watt-hours, TEC module grade, motor specification and packaging weight. Every change is itemised on the quotation rather than absorbed into a round number.
What happens after the MISTAIR-301 shipment lands?
Support does not stop at the port of discharge. Dubai buyers run the same SKU across seasons, and the factory backs that cycle with parts and reorder planning.
Spare parts and service kits
Distributor kits cover TEC plates, chilled gel pads, wrist straps and USB-C cables, and each kit follows the build file of its shipment.
Reorders and season planning
Repeat production runs against the approved golden sample, so the sampling cycle happens once. Gulf summer slots open from January, and confirmed volumes hold the 1,000-unit tier.
Where programme updates are posted
Specification revisions and new ice cooling builds are announced at the icecompressfan.com programme page, so teams track changes without a phone call.
Frequently Asked Questions
Question: What MOQ does the ice compress fan manufacturer programme set for the MISTAIR-301?
Answer: Stock colourways start at 300 units per SKU. A custom Pantone housing colour or modified gel pad starts at 500 units, and mixed trial orders across ice cooling models are accepted from 500 units total.
Question: How fast can I get a sample, and what does it cost?
Answer: Reference samples ship in 5-7 working days ex-works Shenzhen. The sample fee is credited against the first bulk order, so a serious Dubai buyer tests the product at no net cost.
Question: What is the production lead time after the sample is approved?
Answer: 25-35 days after deposit receipt and artwork approval, depending on the packaging complexity and the production calendar at the time of order.
Question: Can I mix models in one order?
Answer: Yes. Mixed orders across the ice cooling range are accepted from 500 units total, with each SKU at 150 units or more so production lines stay efficient.
Question: Which certificates accompany a shipment?
Answer: CE with EMC tested to EN 55014, FCC, RoHS, REACH and UKCA declarations, plus UN38.3, IEC 62133 and MSDS for the lithium cell. Certificate copies travel with the shipping document set.
Question: What branding and packaging options exist?
Answer: Logo printing on the housing and retail box, instruction sheets in English or Arabic, and retail boxes supplied as dieline-approved print files in AI or PDF at 300 dpi.
Question: What are the payment and trade terms?
Answer: 30 percent deposit and 70 percent balance before shipment, FOB Shenzhen as standard, EXW on request. Terms are fixed in the order confirmation.
Question: What warranty covers the product?
Answer: 12 months against manufacturing defects. Distributors can arrange spare-part kits covering plates, gel pads and USB-C cables for after-sales service.
Choose an ice compress fan manufacturer that publishes its own numbers: request the MISTAIR-301 specification file and a Dubai-focused quotation through the MistAirHome ice cooling program page, or send quantity, channel and target price to the factory team for a written review within one working day. Current programme notes sit at www.icecompressfan.com.
MistAirHome welcomes distribution and OEM enquiries from Dubai and worldwide. Contact Mistairhome@163.com or +8613261677119. Official website: www.mistairhome.com. Submit requirements through the OEM/ODM contact page.
Company contact address: Unit B, Building 1, Basda Medical Device Building, No. 28 Nantong Avenue, Baolong Community, Baolong Subdistrict, Longgang District, Shenzhen, Guangdong, China.
This article describes MistAirHome export programmes for trade partners. Order terms are issued in writing per project, and the typical values in the tables are fixed on each quotation.